SKU: Mitsuboshi-Rubber-S14M
Note: Please scroll down and select products based on the parameters.
Get a QuoteContact us today
| STPD/STS Profile | S14M |
|---|---|
| Tooth Pitch t [mm] | 14.0 |
| Overall Belt Thickness H [mm] | 10.2 |
| Body | Neoprene |
| Tensile Members | Fiberglass |
| Minimum Pulley Diameter [mm] | 124.8 |
| Ultimate Tensile Strength [N/10mm belt width] | 3120.0 |
| Width Tolerance [mm] | +/- 1 |
| Max Allowable Tensile Strength M [N/10mm] | 780.0 |
| Length Tolerance [mm] | +/- 0.5 |
| Thickness Tolerance [mm] | +/- 0.4 |
| Hardness | 92 Shore A |
| Brand | Mitsuboshi |
The Mitsuboshi S14M Rubber Timing Belt belongs to the “Mitsuboshi SUPER TORQUE G” series — a family of synchronous drive belts used in industrial power transmission. Its “S14M” designation refers to a tooth pitch of 14.0 mm, making it a “large‑pitch” belt well suited for heavier loads and higher torque transmission compared with small‑pitch types.
| Name | Length [mm] | Width [mm] | Pitch [mm] | Number of Teeth |
|---|
The belt is made of chloroprene (neoprene) rubber, reinforced with fiberglass cords and covered with a nylon tooth fabric, providing a balance of flexibility, strength, and durability. The typical overall belt thickness is about 10.2 mm, with tooth height around 5.30 mm. This construction gives the belt good tensile strength and long‑term wear resistance while remaining stable under load.
Because of its large tooth pitch and robust build, the S14M belt is ideal for power‑transmission tasks that in the past might have required chains or gears. It’s versatile and commonly used in general industrial equipment, machinery requiring high torque, and other applications where strength and reliability are prioritized over extremely fine positioning.
Scan to add us on WeChat!